SJZ-669 Solar animal drive instructions Function Description ‐ Powerful four‐sound ultrasound to drive the animals. When the animal enters the area, the infrared sensor detector is triggered and the product emits super The sound waves make the animal feel uncomfortable and escape from the area. ‐ LED strong flash to drive the animals. When the animal enters the area, the infrared sensor detector is triggered, and the product emits a strong LED flash. The light caused the animals to be scared and fled the area. ‐The buzzer produces a 400Hz‐1000Hz frequency sound wave + motor vibration simulation in the ground vibration emission to stimulate the mouse, the snake central god Through, to drive away the mouse, the purpose of the snake ‐ "Sensitivity" button (top): The switch and sensitivity sensing distance are adjustable. Rotate the knob clockwise to protect the range Gradually get bigger. ‐ "Frequency" button (bottom): This button is used to adjust the ultrasonic frequency. Rotate the knob clockwise, the ultrasonic frequency Gradual change sound wave vibration flash. The gear position and frequency of the "Frequency" button are as follows:
-0: off
-1:13.5KHZ-19.5KHZ Drive animals such as dogs, foxes, and baboons.
-2:19.5KHZ-28.5KHZ Drive away animals such as cats, raccoons, badgers, and skunks.
-3:400Hz-1000Hz drive away mice and drive animals such as snakes.
-4: LED flashes, can drive away raccoons, boars, cockroaches and other animals.
-5: All functions work at the same time, the first to fourth gears work in turn, accompanied
by strong LED flash, ultrasonic, vibration
Motion, sound waves.
Installation Notes
1. Open the battery cover on the back of the solar box, install 3 AA rechargeable batteries,
and close the battery cover. (The battery is standard
Including, this step can be omitted)
2. Place the product in the area that needs to be protected. (eg flower beds or walls, etc.)
3. Choose a suitable orientation to ensure that the top solar panel absorbs solar energy to
the maximum extent possible.
4. If the product is installed underground, insert the grounding rod carefully into the soil.
(Please put the ground rod out of the ground.
14cm. ). It is recommended that the ground be dug well before inserting the product
carefully to protect the product from damage.
5. The product can be inserted in the soil or placed in other flat locations.
Specifications
● Infrared sensing angle: 110 degrees
● Sensing distance: 3-9 meters, the distance can be adjusted and depends on the size
of the animal. (The larger the animal is, the more the distance is sensed.
far)
● Power supply: Solar powered, 3*AA rechargeable battery, or powered by 5V 500mA
adapter.
● The product works when the adapter is linked, but the infrared sensor detector does
not work.
● In case of long-term rainy weather, you can use the adapter to charge.
● Blue LED light: The product senses the animal.
About the battery
1. If the battery has not been used for a long time (1 month), the battery may run out. It is
recommended to fully charge the battery 3-5 times.
That is better and more durable, charging and charging when charging, lack of electricity,
charging, red light, full of green light
2. After the battery has been used for a certain period of time, the life will change and it will
fill up quickly. Please replace the battery at this time.
3. If the battery cannot be used for a long time, replace 3 AA 1.2V rechargeable batteries
(Ni-Cd or Ni-MH). Electricity
The better the pool quality, the better the power and the better the results.
4. Please dispose of the unused batteries to the local recycling center. Please consult the
relevant local authorities for details.
Precautions
1. Humans may have perception of some ultrasound. Keep the product away from the
living area. Do not put the product in babies and children
Areas where activities are frequent.
2. Do not block the infrared sensor detector. When cleaning the product, please use a soft
cloth and soap to clean it. Do not use it.
Chemicals or corrosive objects clean the product to prevent damage.
3. This machine should be installed on a flat or high-slope vertical installation, not on the
ground, so as not to cause the whole machine to soak in the rain.
damage